MaxxiLine News

  • Push-To-Fill Helium Balloon Filler Nozzle

    The Push-To-Fill Helium Balloon Filler Nozzle allows you to fill Latex and Foil balloon balloons in seconds and don't need to waste you fun time. It's so easy that it almost appears magical. Filling Instruction Guide: 1.Unscrew the protective cap from the cylinder valve 2.Screw the filling nozzle gently into the cylinder valve by hand up to abutting against the valve 3.Place the balloon neck over the filling nozzle making sure there is a snug fit so no helium can escape. 4.Hold the balloon neck firmly on the filling nozzle and gently press the lever down to release the helium. Release the lever on the nozzle to stop inflation and remove the balloon, pinching the neck closed so no helium can escape. 5. When you have finished inflating balloons, unscrew the filling nozzle from the cylinder valve and screw again the protective cap. We recommend using a balloon sizer for latex balloons to ensure you do not over-inflate your balloons. For foil balloons inflate until the balloon is slightly firm. Foil balloons are self-sealing so there is no need for tying. We invite you to contact us for any further information .....Here

    20/06/2016

  • Food Safety/HACCP Compliance CO2 E290 Food grade - Argon 938 Food Grade - Nitrogen E941 Food grade

    The HACCP (Hazard Analysis and Critical Control Point) system is a preventative approach to ensuring the safety of food products and consumers. MaxxiLine disposable food grade gas cylinders (CO2 E290 Food grade - Argon 938 Food Grade - Nitrogen E941 Food grade) for sparkling water systems and wine preservation systems are in compliance with the HACCP requirements Reg. EC 852/04 - Reg. EC 178/02 - Legislative Decree 193/07 - Commission Regulation (EU) 231/2012. We invite you to contact us for any further information .....Here

    23/11/2015

  • Special Offers! E290 CO2 Food Grade 1100gr / 800gr - Valve Thread M11x1

    Looking for a great deal? Take today the advantage of our Special Offers on E290 CO2 Food Grade 1000gr / 800gr - Valve Thread M11x1 products range . Private Labeling services available. Our in-house computerized graphics department is available to modify and arrange existing graphics or create a completely new layout. We are readily available to satisfy our customer's most demanding requests. Ask free samples for testing! Do you need a quick quote? We invite you to contact us for any further information .....Here

    09/03/2015

  • New MaxxiLine 1.2ltr MiniBottles

    MaxxiLine MiniBottles have 1.2 liter water capacity. MaxxiLine Mini-Bottles are being filled with gases commonly used in welding, cutting and other industrial applications ( Argon, Argon/CO2, Argon/O2, CO2) as well as in the beverage, aquaristic (CO2) and party industry (Helium). Click here for any further information .....Read More

    24/09/2014

  • New Balloon Filler Nozzle for Helium Bottles

    This balloon inflator is designed to fit straight onto the MaxxiLine disposable helium cylinders . MaxxiLine disposable helium cylinders are safe and very simple to use. Please remember only that latex balloons will stay inflated for max. 14-16 hours so we recommend you inflate them just before your event. Foil balloons stay inflated for approx. 3-4 days ( because they have a self-sealing mechanism built right into the balloons ). Please follow the following simple instructions for inflating latex and foil balloons: Unscrew and remove the valve's protection cap; Fit the Balloon Filler Nozzle on the valve ; Place your balloon neck over the filling nozzle; Tighten the neck with your thumbs and rotate clockwise the nozzle to release the gas and inflate the balloons; Remember to stop the release of the gas by turning the nozzle anti-clockwise. We recommend using a balloon sizer for latex balloons to ensure you do not over-inflate your balloons. For foil balloons inflate until the balloon is slightly firm. Foil balloons are self-sealing so there is no need for tying. We invite you to contact us for any further information .....Here

    28/05/2014

  • Only Certified Quality Products - 100% Made in Italy

    MaxxiLine gas bottles are manufactured in Italy in according to world standards UNI EN 12205 TPED, UNI EN 13322-1 TPED as per Trasportable Pressure Equipment Directive 2010/35/EU. Each production stage is certified and periodically tested by International Inspection bodies. Quality and continuous innovation are based on our daily commitment to offering a steady and punctual supply service. We invite you to contact us for any further information .....Here

    20/02/2014

  • Become a MaxxiLine Distributor

    MaxxiLine is currently expanding and always looking for Distributing Partners in all over Europe, South America, Russia, Ukraina, Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates.If you want to become a Distributor or a referral partner and have any questions regarding the requirements and procedures please contact us to initiate the discussion. We offer interesting possibilities, no matter whether you are an Installer, a Professional Distributing company or a Free Salesman. Please fill out the form .....Here

    20/02/2014

  • MaxxiLine Balloon Fantasy Disposable Helium Bottles

    MaxxiLine offers an extensive range of disposable balloon gas cylinders to suit your needs. There are 3 standard sizes from small to large disposable helium cylinders : 1litre, 1.8 litre, 2.2litre. All of our disposable helium cylinders come with a simple and quick inflator kit to ensure that you can regulate the gas flow to a usable level to fill the ballons. Click here for more information .....Read More

    10/02/2014

  • Welcome to our New Website

    We're very proud to launch our website! Now newly designed with complete sections and information, finding everything you need to know about us and our products it's easier than ever. Browse through our on-line catalogue, find out more about our company history, get information on our newest products, learn about upcoming events and fairs. It's all just a click away!

    15/01/2014



« Back

maxxiline disposable italy

LAST TWEETS

MaxxiLine disposable cylinders EN12205 TPED are available with a variety of gas fills, including Helium, Carbon Dioxide, Argon, Argon/Co2 (Mix), Nitrogen and Argon/O2 (Mix)

Contact Us!

MaxxiLine disposable and refillable gas-filled cylinders are commonly used in a widely variety of applications such as welding/cutting, wine preservation, beer and other beverage dispensing, carbonation systems, ballon gas, for tyre inflation, purging, blanketing, in the refrigeration industry and air conditioning systems.

MaxxiLine can grant you certified top standard quality products, meeting with specific requirements in terms of quality, reliability and top safety.

Contact Us!